ООО "Спецтехнология"

Главная

Инструмент

Режущий инструмент

Токарный инструмент

ВНИМАНИЕ: у нас изменились платежные реквизиты!

Новые реквизиты по ссылке.

Shouldering


TE90XEV-16/22 CHASEALU end mill holder.	TE90XEV-M-16 CHASEALU modular type holder.	TFM90XEV-R-16/22 CHASEALU Face mill cutter with XEVT 16/22.

TE90XEV-HSK63A-16 CHASEALU HSK type face mill cutter.	4N TE90-06 CHASE2MILL Endmill for 4NKT 06 inserts.	4N TE90-M-06 CHASE2MILL Modular type for 4NKT 06 inserts.

4N TF90-R-06 CHASE2MILL Facemill cutter for 4NKT 06 inserts.	6N TE90-04 MILL2RUSH end mill type holder. 90 machining with a 6-corner insert for cost effective machining.	6N TE90-M-04 MILL2RUSH modular type holder. 90 machining with a 6-corner insert for cost effective machining.

6N TF90-R-04 MILL2RUSH face mill cutter. 90 machining with a 6-corner insert for cost effective machining.	2S-TE90AP-19 CHASEMILL end mills for APKT 19.	2S-TFM90AP-R-19 CHASEMILL face mill for APKT 19.

2P TE90-M-05 CHASEMILL POWER Modular type for 2PKT 05.	2P TE90-05 CHASEMILL POWER Endmill for 2PKT 05.	2P TF90-R-05 CHASEMILL POWER Facemill cutter for 2PKT 05.

TES-TN18 MILL2RUSH extended shell mills using TNMX chip splitter inserts.	TEF-TN18 MILL2RUSH extended flute mills using TNMX chip splitter inserts.	SCRM90TN-W-18 MILL2RUSH endmill type holder.

SCRM90TN-M-18 MILL2RUSH Modular Type holder.	SCRM90TN-R-18 MILL2RUSH face mills using TNMX 18 inserts.	LM90SE-R-21 90 LION HEAVY cutters for SEKX 21 size insert.

TESB...-M-13 CHASEFEED Modular for SBMT 13 inserts.	TESB...-13-L CHASEFEED Endmill for SBMT 13.	TFMSB...-R-13 CHASEFEED Face mill for SBMT 13.

TEBL-13-L CHASE2FEED End mill Type for BLMP 13.	TEBL-M-13 CHASE2FEED Modular Type for BLMP 13.	TFMBL-R-13 CHASE2FEED face mill type cutters for BLMP 13 inserts.

TEBL-M-09 CHASE2FEED Modular Type for BLMP 09	TEBL-09 CHASE2FEED End mill Type for BLMP 09	TEBL-M-06 CHASE2FEED modular head type using BLMP 06 insertswith T-FLEXTEC shanks system

TEBL-06 CHASE2FEED for high feed machining of Die & Mold machine shop with 4 cutting edges.	3P TEF-06 Extended flute end mills for 3PKT inserts.	3P TE90-06 MILLRUSH end mills with 3PKT 06

3P TE90-M-06 MILLRUSH modular type holder.	3P TEF-10 Extended flute end mills for 3PKT inserts.	3P TES-10 Extended flute shell mills for 3PKT inserts.

3P TES-15 Extended flute shell mills for 3PKT inserts.	3P TEF-15 Extended flute end mills for 3PKT inserts.	3P TEF-19 Extended flute end mills for 3PKT inserts.

3P TES-19 Extended shell mills for 3PKT inserts.	3P TE90-10/15/19 MILLRUSH end mills for 3PKT 10/15/19	3P TE90-M-10/15/19 MILLRUSH modular type for 3PKT 10/15/19

3P TF90-R-06 MILLRUSH face mill with 3PKT 06	6N TE90-06/09 MILL2RUSH endmill type holder	6N TE90-M-06/09 MILL2RUSH modular type holder

TE90XE-16 CHASEALU end mill holder	TE90XE-M-16 CHASEALU Endmill with T-FLEXTEC Adaptation with XECT 16 insert.	TFM90XE-R-16 CHASEALU Face mill cutter with XECT 16..

TE90AN-11 CHASE2MILL end mill type holder	TE90AN-M-11 CHASE2MILL modular type holder	TE90AN-16 End mills with double sided helical cutting edges.

TE90AN-M-16 CHASE2MILL modular holder for 90° entering angle	FSM 4_M MULTIMILL 4 flute high helix design for roughing and finishing.	AWE 3___ML ALUMILL WAVE 3 flutes unequal spacing of cutting edges with 50helix angle with Medium Length.

AWE 3___ ALUMILL WAVE 3 flutes unequal spacing of cutting edges with 50helix angle.	CFM 4...M APEXMILL4 flutes 38 deg helix angle	3P TF90-R-10/15/19 MILLRUSH face mill cutter (Coarse Pitch & Large Dia)

3P TF90-R-15/19(INCH BORE) MILLRUSH face mill for 3PKT 15/19 with inch bore	6N TF90-R-06/09(INCH BORE) MILL2RUSH facemill cutter(Inch Bore)	6N TF90-R-06/09 MILL2RUSH face mill cutter

2S-TE90AP-M-09 CHASEMILL modular type for new APKT 09 insert	2S-TEF-AP09 CHASEMILL extended flute end mills with APKT 09	2S-TE90AP-09 CHASEMILL end mills for new APKT 09

TE90AX-06 Endmills for AXMT 06..inserts.	TE90AX-M-06 Modular heads for CHASEMILL end mills with AX 06; 12-32mm dia	TE90AP-12 CHASEMILL end mills for APKT 12.. inserts; 16-40mm dia.

TE90AP-M-12 Modular head for CHASEMILL end mills using APKT 12 inserts	TE90AP-17 CHASEMILL end mills for APKT 17 insert	TE90AP-M-17 Modular head type end mills for APKT 17 inserts.

SCRM90TN-R-22 Triangle shape double side screw clapm type 90° cutter.	TFM90SD-R-05 CHASEQUAD- face cutters for SDMT 05.. inserts ; 32-40mm dia.	TE90SD-M-05 CHASEQUAD- modular head type using SDMT 05 inserts

TE90SD-05-C CHASEQUAD end mill for small part machining using SDMT 05 insert with 4 cutting edges.	REH _ ____M Solid Carbide Roughing Endmills, 4~6 Flutes, 45° Helix	REH _ ____S Solid Carbide Roughing Endmills, 4~6 Flutes, 45° Helix

REH ____L Solid Carbide Roughing Endmills, 4~6 Flutes, 45° Helix	REL _ ____L Solid Carbide Roughing Endmills, 3~5 Flutes, 20° Helix	REMA 3___(C) Solid Carbide Roughing Endmills, 3 Flutes, 45° Helix

REA 3___L Solid Carbide Roughing Endmills, 3 Flutes, 30° Helix	SED 4...U STARMILL PLUS solid carbide endmills, 4 flutes, 45 helix	EFE 3...M Solid Carbide Endmills,3 Flute Medium Flat - Economical Type, 38 Helix.

EFE 3...S Solid Carbide Endmills,3 Flute Short Flat - Economical Type,38 Helix.	SED 3___T Solid Carbide Endmills, Square End, 3 Flutes, 50° Helix	HFM 4*** SOLIDFEED new solid carbide endmill for high feed mill

HFM 2*** SOLIDFEED new solid carbide endmill for high feed mill	SEH 6___T-R__ Solid Carbide Endmills, Square-End Corner Radius, 6 Flutes, 45° Helix	SEH 6___T Solid Carbide Endmills, Square End, 6 Flutes, 45° Helix

EFE 4...L APEXMILL 4 Flute Long Flat - Economical Type, 30 Helix.	EFE 4...M APEXMILL 4 Flute Medium Flat - Economical Type, 30 Helix.	EFE 4...S APEXMILL 4 Flute Short Flat - Economical Type, 30 Helix.

TSE 4...M APEXMILL-TSE ENDMILL	AES 3***-R ALUMILL 3 flutes with Corner R	AES 3***ML 3 Flutes 45° Helix, Medium Length, Solid Carbide Endmills. Used for Aluminum Machining.

AES 3*** Solid Carbide Endmills, Square End, 3 Flutes, 45° Helix	AES 3***XL Solid Carbide Endmills, Square End, 3 Flutes, 45° Helix	AES 2***-R ALUMILL 2 flutes with Corner R

AES 2*** Solid Carbide Endmills, Square End, 2 Flutes, 45° Helix	AES 2***XL Solid Carbide Endmills, Square End, 2 Flutes, 45° Helix	AMR 4___T-R__ Solid Carbide Endmills, Square-End Corner Radius, 4 Flutes, 30° Helix

AMR 6___T-R__ Solid Carbide Endmills, Square-End Corner Radius, 6 Flutes, 45° Helix	RIF 2___ Solid Carbide Endmills, Square End, 2 Flutes, 30° Helix	AMF 4___T Solid Carbide Endmills, Square End, 4 Flutes, 30° Helix

EFE 2...M APEXMILL 2 Flute Medium Flat - Economical Type, 30 Helix.	EFE 2...S APEXMILL 2 Flute Short Flat - Economical Type, 30 Helix.	TSE 2...M APEXMILL-TSE ENDMILL

EFE 2...L Solid Carbide Endmills,2 Flute Long Flat - Economical Type, 30 Helix.	RFE 2***SS 2 Flute, 30° Helix, Solid Carbide Endmill with Slim Shank type	HMF 2___ Solid Carbide Endmills, Square End, 2 Flutes, 30° Helix

HSF 2 (0.3-4.0) Solid Carbide Endmills, Long Neck Flat, 2 Flutes, 30 Helix.	HSF 2 (5.0-12.0) Solid Carbide Endmills, Long Neck Flat, 2 Flutes, 30 Helix.	HSF 4 (1.0-5.0) Solid Carbide Endmills, Long Neck Flat, 4 Flutes, 30 Helix.

HSF 4 (6.0-12.0) Solid Carbide Endmills, Long Neck Flat, 4 Flutes, 30 Helix.	HSF 6...M Solid Carbide Endmills, Medium Flat, 6 Flutes, 45 Helix.	HSF 6...XLT Solid Carbide Endmills, Extra Long Flat, 6 Flutes, 45 Helix.

HSR 2 (0.3-4.0) Solid Carbide Endmills,Long Neck Corner Radius, 2 Flutes, 30° Helix.	HSR 2 (6.0-12.0) Solid Carbide Endmills,Long Neck Corner Radius, 2 Flutes, 30° Helix.	HSR 4 (1.0-3.0) Solid Carbide Endmills,Long Neck Corner Radius, 4 Flutes, 30° Helix.

HSR 4 (6.0-12.0) Solid Carbide Endmills,Long Neck Corner Radius, 4 Flutes, 30° Helix.	HSR 6 Solid Carbide Endmills,Long Neck Corner Radius, 6 Flutes, 45° Helix.	HSR 6...M Solid Carbide Endmills, Medium Corner Radius, 6 Flutes, 45° Helix.

AMR 2___T-R__ Solid Carbide Endmills, Square End-Corner Radius, 2 Flutes, 30° Helix	AMF 2___T Solid Carbide Endmills, Square End, 2 Flutes, 30° Helix	SEH 6___XLT Solid Carbide Endmills, Square End, 6 Flutes, 45° Helix

HES 6___T Solid Carbide Endmills, Square End, 6 Flutes, 45° Helix	HES 4___LT-R Solid Carbide Endmills, Square End, 4 Flutes, 30°°Helix	HES 2___LT Solid Carbide Endmills, Square End, 2 Flutes, 30° Helix

HES 2___LT-R Solid Carbide Endmills, Square End, 4 Flutes, 30° Helix	HES 2___T-R__ Solid Carbide Endmills, Square End-Corner Radius, 2 Flutes, 30° Helix	HES 2___X LT Solid Carbide Endmills, Square End, 2 Flutes, 30° Helix

HES 4___T-R__ Solid Carbide Endmills, Square-End Corner Radius, 4 Flutes, 30° Helix	HES 4___LT Solid Carbide Endmills, Square End, 4 Flutes, 30° Helix	HES 4___X LT Solid Carbide Endmills, Square End, 4 Flutes, 30° Helix

DER 3___S Solid Carbide Endmills, Corner Radius, 3 Flutes, 40° Helix	DER 3___L Solid Carbide Endmills, Corner Radius, 3 Flutes, 40° Helix	DMR 2___ Solid Carbide Endmills, Corner Radius, 2 Flutes, 30° Helix

TSE 2...M-UNCOATED APEXMILL-TSE ENDMILL-UNCOATED	TSE 4...M-UNCOATED APEXMILL-TSE ENDMILL-UNCOATED	TEF-AX06 Extended flute end mills for AXMT 06/12 inserts.

TEF-AN11 CHASE2MILL end mill type holder with long edge	TES-AN11 CHASE2MILL shouldering type cutter with long edge	TEF-W-AP12 Extended flute end mills using APKT 12 inserts; Full effective

TES-AP12 Shell mill extended flute using ADKT/R-15.. inserts	TEF-W-AP17 Extended flute end mills using APKT 17 inserts; Full effective	TES-AP17 Extended flute shell mill using APKT 17 inserts

TEF-AN16 CHASE2MILL extended flute end mill holder	TES-AN16 CHASE2MILL shouldering cutter with long edge	TFM90AX-R-06 CHASEMILL face cutters for AXMT 0602 inserts ; 32-40mm dia

TFM90AN-R-11 CHASE2MILL face mill with AN..11 inserts	TFM90AN-R-16 CHASE2MILL face mills with AN.. 16 inserts-double sided helical insert with 4 cutting edges	2S-TFM90AP-R-09 CHASEMILL face cutter for new APKT 09

TFM90AP-R-12 CHASEMILL face cutters using APKT 1204.. ; Dia 40-80 mm	TFM90AP-R-17/17-B 90° face mills using CHASEMILL APKT 17.. inserts.	TFM90SE-R-13 90°°face mills using SEMT insert.

TFM90SN-R-13 CHASE2QUAD 90° Face Mill cutter.	TEF-09/11 Extended flute end mills using SPMT 09/11, SPMG 09/11 inserts ; 32-50mm dia.	TEF-SD05 Extended flute end mills for SDMT 0502 inserts ; 20-25mm dia

TES-11/14 Extended flute shell mill using SPMT 11/14, SPMG 11/14 inserts - full effective	TFMBL-R-06 CHASE2FEED face mill cutter using BLMP 06 inserts with mum diameter 16mm	TFMBL-R-09 CHASE2FEED Face Mill Type for BLMP 09

LM90TP-R-22 LIONMILL 90° face mill cutter.	TSF-06 End mills for XOMT 06 inserts ; 12-20mm dia.	TSF-09/11/14 End mills for SPMG,SPMT inserts ; 22-50mm dia.

TDM-06 Drilling endmills using XOMT 06 inserts ; 12-22mm dia.	TDM-09/11/14 Drilling end mills using SPMG 09/11/14, SPMT 09/11/14 inserts	TNFR-CT-L FINEBALL carner radius with tungsten carbide shank holder

TEXD-08 Fast feed end mills with XOMT 08 inserts.	TNFR FINEBALL corner radius type with steel shank holder	TNFR-M FINEBALL carner radius type modular head holder

TEXD-13 CHASE2FEED end mills with XDMX 13 inserts.	TEXD-M-08/13 Modular head type end mill of CHASE2FEED line.	TFMXD-R-13 CHASE2FEED face mills milling cutters with XOMT 13 inserts.

TFMXD-R-O8 CHASE2FEED Cutter face mills using XDMX 08 inserts.

Facing


14D-F45XN-06 CHASE2HEPTA screw type facemill cutter.	14D-F45XN-R-09 CHASE2HEPTA screw type facemill cutter	14D-F45XNW-R-09 CHASE2HEPTA wedge type facemill cutter

TFM45SNS-R-16 45°CHASE2QUAD cutter with inclined screw clamp type for heavy rough milling	TFM45SNS-R-16B-CA 45°CHASE2QUAD cutter with cartrige type for heavy rough milling	TFM45SN-R-13 CHASE2QUAD face mill

TFM45AN-R-16 CHASE2MILL cutter for 45° entering angle	TFM45HNS-R-10 HEXA2MILL Double sided screw clamp type 45deg	LM60SC-R-21 LIONMILL for heavy milling cutter with 21 size insert

LM60SC-R-27 LIONMILL for heavy milling cutter with 27 size insert	TFM55AHNS-R-05 Angled screw on type size HEXA2MILL cutter.	TFM45HN-R-10 TFM45HN: HEXA2MILL fine pitch wedge clamp type 45°. TQ45HN: HEXA2MILL fine pitch quick change type 45°.

TFM45SNW-R-16 45°CHASE2QUAD cutter with wedge clamp type for heavy roughing	TFM43OFS-R-05 43° face mills using octagonal and round inserts.	TFM43ZOFW-R-07 43° face mills using octagonal and round inserts.

TFM45SE-R-12/12F 45° face mills using SEK/MT.. inserts.	TE45SE-12 45° CHASEQUAD end mill using SEKT 12 insert.	TFM75SN-R-13 CHASE2QUAD face mill

TFM75AP-R-17 75° face mills using APKT 17 CHASEMILL inserts.	2S-TFM90AP-R-19 CHASEMILL face mill for APKT 19.	2S-TE90AP-19 CHASEMILL end mills for APKT 19.

4N TE90-M-06 CHASE2MILL Modular type for 4NKT 06 inserts.	4N TF90-R-06 CHASE2MILL Facemill cutter for 4NKT 06 inserts.	4N TE90-06 CHASE2MILL Endmill for 4NKT 06 inserts.

2P TF90-R-05 CHASEMILL POWER Facemill cutter for 2PKT 05.	6N TF90-R-04 MILL2RUSH face mill cutter. 90 machining with a 6-corner insert for cost effective machining.	6N TF90-R-06/09 MILL2RUSH face mill cutter

6N TF90-R-06/09(INCH BORE) MILL2RUSH facemill cutter(Inch Bore)	3P TF90-R-06 MILLRUSH face mill with 3PKT 06	3P TF90-R-10/15/19 MILLRUSH face mill cutter (Coarse Pitch & Large Dia)

3P TF90-R-15/19(INCH BORE) MILLRUSH face mill for 3PKT 15/19 with inch bore	LM90SE-R-21 90 LION HEAVY cutters for SEKX 21 size insert.	TPM-R-PL09 CHASE2PLUNGE Face Mill Type

TFM90SN-R-13 CHASE2QUAD 90° Face Mill cutter.	TFM88SN-R-13 CHASE2QUAD 88° Face Mill cutter.	TFMSB...-R-13 CHASEFEED Face mill for SBMT 13.

TESB...-M-13 CHASEFEED Modular for SBMT 13 inserts.	TESB...-13-L CHASEFEED Endmill for SBMT 13.	TFMBL-R-13 CHASE2FEED face mill type cutters for BLMP 13 inserts.

TFM15HNS-R-10 HEXA2MILL High feed screw clamp type 15deg	TFMBL-R-09 CHASE2FEED Face Mill Type for BLMP 09	TFMBL-R-06 CHASE2FEED face mill cutter using BLMP 06 inserts with mum diameter 16mm

TE90XEV-M-16 CHASEALU modular type holder.	TE90XEV-16/22 CHASEALU end mill holder.	TE90XEV-HSK63A-16 CHASEALU HSK type face mill cutter.

TFM90XEV-R-16/22 CHASEALU Face mill cutter with XEVT 16/22.	TFM90SD-R-05 CHASEQUAD- face cutters for SDMT 05.. inserts ; 32-40mm dia.	TFMRNS-R-10/12/16 CHASE2MOLD face mill type cutter

TFMRY-R-08/10/12/16/20 CHASEMOLD facemill type holder	TFMRX-R-10/12/16 CHASEMOLD round inserts for profiling and milling of round corners.	TFMRX-R-20 CHASEMOLD Face mills using RXMX 20 insert for profiling and milling of round corners.

TFMRN-R-12CH Dimple CH type cutter for nickle base super alloy and ductile cast iron.	TFM90XE-R-16 CHASEALU Face mill cutter with XECT 16..	TFM90AN-R-16 CHASE2MILL face mills with AN.. 16 inserts-double sided helical insert with 4 cutting edges

TFM90AN-R-11 CHASE2MILL face mill with AN..11 inserts	TFM90AP-R-12 CHASEMILL face cutters using APKT 1204.. ; Dia 40-80 mm	2S-TFM90AP-R-09 CHASEMILL face cutter for new APKT 09

TFM90AP-R-17/17-B 90° face mills using CHASEMILL APKT 17.. inserts.	TFM90AX-R-06 CHASEMILL face cutters for AXMT 0602 inserts ; 32-40mm dia	TFM90SE-R-13 90°°face mills using SEMT insert.

TFM90SNS-12-QC CHASE2QUAD new quick change type cutter.	TFM90SNS-R-12 CHASE2QUAD Finish Mill with super finishing all adjustable type	TQ90SNS-R-12 CHASE2QUAD face mill ,quick change type cutter

TFM45SN-13-QC CHASE2QUAD new quick change type cutter.	14D-F45XNW-09-QC CHASE2QUAD new quick change type cutter.	TQ45HN-R-10 45 HEXA2MILL cutter with quick change type for heavy rough milling.

TQ45SNW-R-16 45° new CHASE2QUAD cutter with quick change type for heavy rough milling	SCRM90TN-R-18 MILL2RUSH face mills using TNMX 18 inserts.	SCRM90TN-R-22 Triangle shape double side screw clapm type 90° cutter.

2P TE90-05 CHASEMILL POWER Endmill for 2PKT 05.	2P TE90-M-05 CHASEMILL POWER Modular type for 2PKT 05.	6N TE90-04 MILL2RUSH end mill type holder. 90 machining with a 6-corner insert for cost effective machining.

6N TE90-M-04 MILL2RUSH modular type holder. 90 machining with a 6-corner insert for cost effective machining.	3P TE90-10/15/19 MILLRUSH end mills for 3PKT 10/15/19	3P TE90-06 MILLRUSH end mills with 3PKT 06

3P TE90-M-06 MILLRUSH modular type holder.	3P TE90-M-10/15/19 MILLRUSH modular type for 3PKT 10/15/19	6N TE90-06/09 MILL2RUSH endmill type holder

6N TE90-M-06/09 MILL2RUSH modular type holder	LM45SE-R-15 LIONMILL 45° face mill cutter.	SCRM90TN-W-18 MILL2RUSH endmill type holder.

LM45SE-R-12 LIONMILL 45° face mill cutter.	LM45SD-R-12 LIONMILL 45° face mill cutter.	LM45SD-R-15 LIONMILL 45° face mill cutter.

LM75SP-R-15 LIONMILL 75° face mill cutter.	LM75SP-R-12 LIONMILL 75° face mill cutter.	LM90TP-R-22 LIONMILL 90° face mill cutter.

SCRM90TN-M-18 MILL2RUSH Modular Type holder.	TEBL-M-09 CHASE2FEED Modular Type for BLMP 09	TEBL-M-13 CHASE2FEED Modular Type for BLMP 13.

TEBL-09 CHASE2FEED End mill Type for BLMP 09	TEBL-13-L CHASE2FEED End mill Type for BLMP 13.	TEBL-M-06 CHASE2FEED modular head type using BLMP 06 insertswith T-FLEXTEC shanks system

TEBL-06 CHASE2FEED for high feed machining of Die & Mold machine shop with 4 cutting edges.	TE90AX-M-06 Modular heads for CHASEMILL end mills with AX 06; 12-32mm dia	TE90AX-06 Endmills for AXMT 06..inserts.

TE90AP-M-17 Modular head type end mills for APKT 17 inserts.	TE90AP-17 CHASEMILL end mills for APKT 17 insert	2S-TE90AP-09 CHASEMILL end mills for new APKT 09

2S-TE90AP-M-09 CHASEMILL modular type for new APKT 09 insert	TE90AP-M-12 Modular head for CHASEMILL end mills using APKT 12 inserts	TE90AP-12 CHASEMILL end mills for APKT 12.. inserts; 16-40mm dia.

TE90AN-M-16 CHASE2MILL modular holder for 90° entering angle	TE90AN-16 End mills with double sided helical cutting edges.	TE90AN-M-11 CHASE2MILL modular type holder

TE90AN-11 CHASE2MILL end mill type holder	TERNS-M-10/12/16 CHASE2MOLD modular	TERNS-10/12/16 CHASE2MOLD end mills

TERY-M-08/10/12/16 CHASEMOLD modular type holder	TERY-08/10/12/16/20 CHASEMOLD endmill type holder	TPM-M-PL09 CHASE2PLUNGE Modular Type

TPM-PL09 CHASE2PLUNGE End mill type	TE90XE-16 CHASEALU end mill holder	TE90XE-M-16 CHASEALU Endmill with T-FLEXTEC Adaptation with XECT 16 insert.

TERX-20 CHASEMOLD end mills using RXMX 20 inserts for profiling and milling of round corners.	TERX-10/12/16 CHASEMOLD End mills for RXMX 10/12/16 insert.	TFMXD-R-O8 CHASE2FEED Cutter face mills using XDMX 08 inserts.

TFMXD-R-13 CHASE2FEED face mills milling cutters with XOMT 13 inserts.	TE90SD-05-C CHASEQUAD end mill for small part machining using SDMT 05 insert with 4 cutting edges.	TE90SD-M-05 CHASEQUAD- modular head type using SDMT 05 inserts

TERD-M-05/07 Endmills with coarse pitch for four insert shapes with T-FLEXTEC adaptation.	TERP-W-12CH Dimple ceramic endmill for aerospace industry & cast iron	TERX-M-10/12/16 Modular head for RXMX 10/12/16 insert.

TEXD-M-08/13 Modular head type end mill of CHASE2FEED line.	TEXD-08 Fast feed end mills with XOMT 08 inserts.	TEXD-13 CHASE2FEED end mills with XDMX 13 inserts.

Reaming

TM-B-3D/5D/8D (SHANKS)
Shanks for the TM-REAM Interchangeable Head Reamers

TB-T-T0-B
Single-Edged Indexable Reamers, for Through Holes

TB-B-T0-B
Single-Edged Indexable Reamers, for Blind Holes

TS-S-SC/TS
Solid Carbide Reamers with a Cylindrical Shank, Straight Flute, DIN 8093

TS-L-SC/TS
Solid Carbide Reamers with a Cylindrical Shank, Spiral Flute- DIN 8093.

Drilling Ext Face Int. Turning

SXUCR/L
Boring Bars with T-Cap Inserts.

TBSL
Sleeves for Boring Bar

TCAP-2.25DN
Multifunction drilling, boring, facing and external turning tool.

TCAP-2.25DN-GV
TOPCAP grooving with the new standard holder 2.25XD

TCAP-3.0DN
3XD T-CAP line

TCAP-3.0DN-GV
TOPCAP grooving with the new standard holder 3.0XD

Chamfering

TCD-M**(PRE-THREAD)
Indexable Head Drills with Chamfering Insert, Mainly for Pre-Thread Holes.

T-CHAMFER-...-T1
Modular chamfering holder

CFR-A45
Chamfering ring mounted on the DRILLRUSH,TOPDRILL and T-DRILL for drilling chamfering in one operation.

SHO-M(PRE-THREAD)
Solid Pre-Thread Drills for drilling and chamfering.

DeepDrill

BTA-DE4 BTA series double tube system with outer four start thread. (BTA Brazed)	BTA-SE2/SE4 BTA series single tube system with outer four start thread. (BTA Brazed)	BTS-SE1 BTS series single tube system with outer ONE start thread. (BTA Brazed)
BTS-SE2/SE4 BTS series single tube system with outer four start thread. (BTA Brazed)	TBTA-FB-DE4 (23.5-55.5) TBTA-FB series single tube system with outer four startthreathread.	TBTA-FB-SE4 (22-56) TBTA-FB series single tube system with outer four start thread.
TBTA-FB-SI1 (22-39) TBTA-FB series single tube system with inner sigle start thread.	TBTA3-...-DE4 Deep Double Tube Drill with Outer 4 Start Thread Connection and Indexable Insert Drill Head.	TBTA3-...-SE4 Deep Single Tube Drill with Outer 4 Stat Thread Connection and Indexable Insert Drill Head.
TBTA3-...-SI1 Deep Single Tube Drill with Inner Single Start Thread Connection and Indexable insert Drill Head.	TBTA5-...-DE4 Deep Double Tube Drill with Outer 4 Start Thread Connection and Indexable Insert Drill Head.	TBTA5-...-SE4 Deep Single Tube Drill with Outer 4 Stat Thread Connection and Indexable Insert Drill Head.
TBTA5-...-SI1 Deep Single Tube Drill with Inner Single Start Thread Connection and Indexable insert Drill Head.	TBTA7-...-SE4 Deep Single Tube Drill with Outer 4 Stat Thread Connection and Indexable Insert Drill Head.	TBTA7-...-SI1 TBTA7 series single tube system with inner single start thread.
TBTA9-...-SE4 Deep Single Tube Drill with Outer 4 Stat Thread Connection and Indexable Insert Drill Head.	TBTA9-...-SI1 TBTA9 series single tube system with inner single start thread.

Страница 9 из 23

«В начало Назад45678910111213Вперёд В конец»

Представляемая продукция:

ООО "Спецтехнология"

СКИФ-М (Россия) - корпусные фрезы и свёрла

TAEGU TEC (Южная Корея)-инструмент, оснастка

HORN (Германия) - инструмент

GUHRING (Германия) - инструмент

VERTEX (Тайвань) - оснастка

МИКРОН (Россия) - мерительный инструмент

SPINNER (Германия) - токарные и фрезерные станки

FEELER (Тайвань) - токарные и фрезерные станки

MATEC (Германия) - фрезерные станки

LAZZATI (Италия) - фрезерное оборудование


Телефон: (383) 263-32-98 +7-999-451-42-89	E-mail: Этот адрес электронной почты защищен от спам-ботов. У вас должен быть включен JavaScript для просмотра. Этот адрес электронной почты защищен от спам-ботов. У вас должен быть включен JavaScript для просмотра.

Адрес: 630091, г. Новосибирск ул. Красный проспект, 72	Часы работы: ПН - ПТ: 9:00 - 18:00 СБ - ВС: выходные

Карта Дубль-Гис
Схема проезда

footer map