ООО "Спецтехнология"

TE90XEV-M-16
CHASEALU modular type holder.

TE90XEV-16/22
CHASEALU end mill holder.

TE90XEV-HSK63A-16
CHASEALU HSK type face mill cutter.

TFM90XEV-R-16/22
CHASEALU Face mill cutter with XEVT 16/22.

6N TF90-R-04
MILL2RUSH face mill cutter. 90 machining with a 6-corner insert for cost effective machining.

6N TE90-M-04
MILL2RUSH modular type holder. 90 machining with a 6-corner insert for cost effective machining.

6N TE90-04
MILL2RUSH end mill type holder. 90 machining with a 6-corner insert for cost effective machining.

2P TE90-05
CHASEMILL POWER Endmill for 2PKT 05.

2P TE90-M-05
CHASEMILL POWER Modular type for 2PKT 05.

2P TF90-R-05
CHASEMILL POWER Facemill cutter for 2PKT 05.

4N TE90-M-06
CHASE2MILL Modular type for 4NKT 06 inserts.

4N TF90-R-06
CHASE2MILL Facemill cutter for 4NKT 06 inserts.

4N TE90-06
CHASE2MILL Endmill for 4NKT 06 inserts.

2S-TFM90AP-R-19
CHASEMILL face mill for APKT 19.

2S-TE90AP-19
CHASEMILL end mills for APKT 19.

6N TE90-06/09
MILL2RUSH endmill type holder

6N TE90-M-06/09
MILL2RUSH modular type holder

3P TE90-06
MILLRUSH end mills with 3PKT 06

3P TE90-M-06
MILLRUSH modular type holder.

3P TE90-10/15/19
MILLRUSH end mills for 3PKT 10/15/19

3P TE90-M-10/15/19
MILLRUSH modular type for 3PKT 10/15/19

TE90AN-11
CHASE2MILL end mill type holder

TE90AN-M-11
CHASE2MILL modular type holder

TE90AN-16
End mills with double sided helical cutting edges.

TE90AN-M-16
CHASE2MILL modular holder for 90° entering angle

TE90AX-M-06
Modular heads for CHASEMILL end mills with AX 06; 12-32mm dia

TE90AX-06
Endmills for AXMT 06..inserts.

2S-TE90AP-M-09
CHASEMILL modular type for new APKT 09 insert

2S-TE90AP-09
CHASEMILL end mills for new APKT 09

TE90SD-05-C
CHASEQUAD end mill for small part machining using SDMT 05 insert with 4 cutting edges.

TE90AP-M-12
Modular head for CHASEMILL end mills using APKT 12 inserts

TE90AP-12
CHASEMILL end mills for APKT 12.. inserts; 16-40mm dia.

TE90AP-17
CHASEMILL end mills for APKT 17 insert

TE90AP-M-17
Modular head type end mills for APKT 17 inserts.

TE90SD-M-05
CHASEQUAD- modular head type using SDMT 05 inserts

TESB...-M-13
CHASEFEED Modular for SBMT 13 inserts.

TESB...-13-L
CHASEFEED Endmill for SBMT 13.

TFMSB...-R-13
CHASEFEED Face mill for SBMT 13.

TFMBL-R-13
CHASE2FEED face mill type cutters for BLMP 13 inserts.

TEBL-13-L
CHASE2FEED End mill Type for BLMP 13.

TEBL-M-13
CHASE2FEED Modular Type for BLMP 13.

TSF-06
End mills for XOMT 06 inserts ; 12-20mm dia.

TSF-09/11/14
End mills for SPMG,SPMT inserts ; 22-50mm dia.

SCRM90TN-M-18
MILL2RUSH Modular Type holder.

SCRM90TN-W-18
MILL2RUSH endmill type holder.

TNFR-M
FINEBALL carner radius type modular head holder

TNFR
FINEBALL corner radius type with steel shank holder

TNFR-CT-L
FINEBALL carner radius with tungsten carbide shank holder

TE90XE-M-16
CHASEALU Endmill with T-FLEXTEC Adaptation with XECT 16 insert.

TE90XE-16
CHASEALU end mill holder

CFM 4...M
APEXMILL4 flutes 38 deg helix angle

FSM 4_M
MULTIMILL 4 flute high helix design for roughing and finishing.

HFM 4***
SOLIDFEED new solid carbide endmill for high feed mill

HFM 2***
SOLIDFEED new solid carbide endmill for high feed mill

HMF 2___
Solid Carbide Endmills, Square End, 2 Flutes, 30° Helix

REH ____L
Solid Carbide Roughing Endmills, 4~6 Flutes, 45° Helix

REH _ ____M
Solid Carbide Roughing Endmills, 4~6 Flutes, 45° Helix

REH _ ____S
Solid Carbide Roughing Endmills, 4~6 Flutes, 45° Helix

REMA 3___(C)
Solid Carbide Roughing Endmills, 3 Flutes, 45° Helix

REA 3___L
Solid Carbide Roughing Endmills, 3 Flutes, 30° Helix

REL _ ____L
Solid Carbide Roughing Endmills, 3~5 Flutes, 20° Helix

HES 2___LT
Solid Carbide Endmills, Square End, 2 Flutes, 30° Helix

HES 2___LT-R
Solid Carbide Endmills, Square End, 4 Flutes, 30° Helix

HES 2___X LT
Solid Carbide Endmills, Square End, 2 Flutes, 30° Helix

HES 2___T-R__
Solid Carbide Endmills, Square End-Corner Radius, 2 Flutes, 30° Helix

HES 4___LT
Solid Carbide Endmills, Square End, 4 Flutes, 30° Helix

HES 4___X LT
Solid Carbide Endmills, Square End, 4 Flutes, 30° Helix

HES 4___T-R__
Solid Carbide Endmills, Square-End Corner Radius, 4 Flutes, 30° Helix

HES 6___T
Solid Carbide Endmills, Square End, 6 Flutes, 45° Helix

SED 3___T
Solid Carbide Endmills, Square End, 3 Flutes, 50° Helix

TSE 2...M-UNCOATED
APEXMILL-TSE ENDMILL-UNCOATED

TSE 2...M
APEXMILL-TSE ENDMILL

AES 2***XL
Solid Carbide Endmills, Square End, 2 Flutes, 45° Helix

AES 2***
Solid Carbide Endmills, Square End, 2 Flutes, 45° Helix

AES 2***-R
ALUMILL 2 flutes with Corner R

AMR 2___T-R__
Solid Carbide Endmills, Square End-Corner Radius, 2 Flutes, 30° Helix

AMF 2___T
Solid Carbide Endmills, Square End, 2 Flutes, 30° Helix

HSF 2 (5.0-12.0)
Solid Carbide Endmills, Long Neck Flat, 2 Flutes, 30 Helix.

HSF 2 (0.3-4.0)
Solid Carbide Endmills, Long Neck Flat, 2 Flutes, 30 Helix.

HSF 4 (6.0-12.0)
Solid Carbide Endmills, Long Neck Flat, 4 Flutes, 30 Helix.

HSF 4 (1.0-5.0)
Solid Carbide Endmills, Long Neck Flat, 4 Flutes, 30 Helix.

HSF 6...M
Solid Carbide Endmills, Medium Flat, 6 Flutes, 45 Helix.

HSF 6...XLT
Solid Carbide Endmills, Extra Long Flat, 6 Flutes, 45 Helix.

HSR 2 (0.3-4.0)
Solid Carbide Endmills,Long Neck Corner Radius, 2 Flutes, 30° Helix.

HSR 2 (6.0-12.0)
Solid Carbide Endmills,Long Neck Corner Radius, 2 Flutes, 30° Helix.

HSR 4 (1.0-3.0)
Solid Carbide Endmills,Long Neck Corner Radius, 4 Flutes, 30° Helix.

HSR 4 (6.0-12.0)
Solid Carbide Endmills,Long Neck Corner Radius, 4 Flutes, 30° Helix.

HSR 6
Solid Carbide Endmills,Long Neck Corner Radius, 6 Flutes, 45° Helix.

HSR 6...M
Solid Carbide Endmills, Medium Corner Radius, 6 Flutes, 45° Helix.

DMR 2___
Solid Carbide Endmills, Corner Radius, 2 Flutes, 30° Helix

TSE 4...M
APEXMILL-TSE ENDMILL

TSE 4...M-UNCOATED
APEXMILL-TSE ENDMILL-UNCOATED

EFE 2...S
APEXMILL 2 Flute Short Flat - Economical Type, 30 Helix.

EFE 2...L
Solid Carbide Endmills,2 Flute Long Flat - Economical Type, 30 Helix.

EFE 2...M
APEXMILL 2 Flute Medium Flat - Economical Type, 30 Helix.

EFE 3...S
Solid Carbide Endmills,3 Flute Short Flat - Economical Type,38 Helix.

EFE 3...M
Solid Carbide Endmills,3 Flute Medium Flat - Economical Type, 38 Helix.

EFE 4...L
APEXMILL 4 Flute Long Flat - Economical Type, 30 Helix.

EFE 4...M
APEXMILL 4 Flute Medium Flat - Economical Type, 30 Helix.

EFE 4...S
APEXMILL 4 Flute Short Flat - Economical Type, 30 Helix.

SED 4...U
STARMILL PLUS solid carbide endmills, 4 flutes, 45 helix

RFE 2***SS
2 Flute, 30° Helix, Solid Carbide Endmill with Slim Shank type

RIF 2___
Solid Carbide Endmills, Square End, 2 Flutes, 30° Helix

3P TEF-06
Extended flute end mills for 3PKT inserts.

3P TEF-10
Extended flute end mills for 3PKT inserts.

3P TES-10
Extended flute shell mills for 3PKT inserts.

3P TEF-15
Extended flute end mills for 3PKT inserts.

3P TES-15
Extended flute shell mills for 3PKT inserts.

3P TEF-19
Extended flute end mills for 3PKT inserts.

3P TES-19
Extended shell mills for 3PKT inserts.

2S-TEF-AP09
CHASEMILL extended flute end mills with APKT 09

TEF-W-AP12
Extended flute end mills using APKT 12 inserts; Full effective

TES-AP12
Shell mill extended flute using ADKT/R-15.. inserts

TEF-AN11
CHASE2MILL end mill type holder with long edge

TES-AN11
CHASE2MILL shouldering type cutter with long edge

TEF-AN16
CHASE2MILL extended flute end mill holder

TES-AN16
CHASE2MILL shouldering cutter with long edge

TEF-AX06
Extended flute end mills for AXMT 06/12 inserts.

TEF-SD05
Extended flute end mills for SDMT 0502 inserts ; 20-25mm dia

TES-AP17
Extended flute shell mill using APKT 17 inserts

TEF-W-AP17
Extended flute end mills using APKT 17 inserts; Full effective

TES-TN18
MILL2RUSH extended shell mills using TNMX chip splitter inserts.

TEF-TN18
MILL2RUSH extended flute mills using TNMX chip splitter inserts.

TEF-09/11
Extended flute end mills using SPMT 09/11, SPMG 09/11 inserts ; 32-50mm dia.

TES-11/14
Extended flute shell mill using SPMT 11/14, SPMG 11/14 inserts - full effective

3P TF90-R-06
MILLRUSH face mill with 3PKT 06

3P TF90-R-15/19(INCH BORE)
MILLRUSH face mill for 3PKT 15/19 with inch bore

3P TF90-R-10/15/19
MILLRUSH face mill cutter (Coarse Pitch & Large Dia)

SCRM90TN-R-22
Triangle shape double side screw clapm type 90° cutter.

SCRM90TN-R-18
MILL2RUSH face mills using TNMX 18 inserts.

TFM90SD-R-05
CHASEQUAD- face cutters for SDMT 05.. inserts ; 32-40mm dia.

TFM90AX-R-06
CHASEMILL face cutters for AXMT 0602 inserts ; 32-40mm dia

TFM90XE-R-16
CHASEALU Face mill cutter with XECT 16..

TFM90AN-R-11
CHASE2MILL face mill with AN..11 inserts

TFM90AN-R-16
CHASE2MILL face mills with AN.. 16 inserts-double sided helical insert with 4 cutting edges

6N TF90-R-06/09(INCH BORE)
MILL2RUSH facemill cutter(Inch Bore)

6N TF90-R-06/09
MILL2RUSH face mill cutter

LM90SE-R-21
90 LION HEAVY cutters for SEKX 21 size insert.

TFM90AP-R-17/17-B
90° face mills using CHASEMILL APKT 17.. inserts.

TFM90AP-R-12
CHASEMILL face cutters using APKT 1204.. ; Dia 40-80 mm

2S-TFM90AP-R-09
CHASEMILL face cutter for new APKT 09

TFM90SE-R-13
90°°face mills using SEMT insert.

TSM-M-SL (MODULAR TYPE)
Grooving and slotting cutters.

TSM-W-SL (ENDMILL TYPE)
Grooving and slotting cutters.

TSM...R-TS16(FLANGE TYPE)
Grooving shell mills with 3 cutting edges inserts.

TSM...-W...-TS16(ENDMILL TYPE)
Grooving shell mills with 3 cutting edges inserts.

TSM FF-ZNHT 018-053
TOPSLOT fixed pocket flange type cutter

TSM FD-ZNHT 018-053
TOPSLOT fixed pocket disk type cutter

TSM FF-ZNHU 080/110
TOPSLOT fixed pocket flange type cutter (ZNHU)

TSM FD-ZNHU 080/110
TOPSLOT fixed pocket disk type cutter (ZNHU)

TSM ***FF-ZN08/11/14(ADJUST)
TOPSLOT adjustable flange type cutter

TSM ***FD-ZN08/11/14(ADJUST)
TOPSLOT adjustable disk type cutter

TSC-SLOTTING
Slotting Cutters


TERNS-10/12/16 CHASE2MOLD end mills	TERNS-M-10/12/16 CHASE2MOLD modular	TFMRNS-R-10/12/16 CHASE2MOLD face mill type cutter

TERY-08/10/12/16/20 CHASEMOLD endmill type holder	TFMRY-R-08/10/12/16/20 CHASEMOLD facemill type holder	TERY-M-08/10/12/16 CHASEMOLD modular type holder

2F 16/20/25/30/32-M DUETBALL modular type holder for R8/R10/R12.5 2FB.. inserts	2F 16/20/25/30/32 DUETBALL end mill for rough or semi-finish profiling	3F 50-CN TRIOBALL combination shank type holder

3F 32/50-W TRIOBALL weldon shank type holder	TDB50X-WT WT shnak type holders with 6RBE 50-M inserts for rough ball tools	TDB50X-CN Combination shank type holders with 6RBE 50-M inserts for rough ball tools

TDB50X-W Weldon shank type holders with 6RBE 50-M inserts for rough ball tools	TESB...-M-13 CHASEFEED Modular for SBMT 13 inserts.	TESB...-13-L CHASEFEED Endmill for SBMT 13.

TFMSB...-R-13 CHASEFEED Face mill for SBMT 13.	TEBL-M-13 CHASE2FEED Modular Type for BLMP 13.	TEBL-13-L CHASE2FEED End mill Type for BLMP 13.

TFMBL-R-13 CHASE2FEED face mill type cutters for BLMP 13 inserts.	TEBL-09 CHASE2FEED End mill Type for BLMP 09	TEBL-06 CHASE2FEED for high feed machining of Die & Mold machine shop with 4 cutting edges.

TEBL-M-06 CHASE2FEED modular head type using BLMP 06 insertswith T-FLEXTEC shanks system	TEBL-M-09 CHASE2FEED Modular Type for BLMP 09	TFMBL-R-06 CHASE2FEED face mill cutter using BLMP 06 inserts with mum diameter 16mm

TFMBL-R-09 CHASE2FEED Face Mill Type for BLMP 09	TNF-CT-L FINEBALL carbide shank type holder	TNF-M FINEBALL modular head type holder

TNF FINEBALL steel shank holder	HSB 2 (0.3-5.0) 2 Flute, 30 degree Helix Long Solid Carbide Ball Nose Endmills.	HSB 2 (6.0-12.0) 2 Flute, 30 degree Helix Long Solid Carbide Ball Nose Endmills.

HSB 2...M 2 Flute, 30 degree Helix Medium Solid Carbide Ball Nose Endmills.	HSB 2...S 2 Flute, 30 degree Helix Short Solid Carbide Ball Nose Endmills.	HSB 2...S6 2 Flute, 30 degree Helix Long Solid Carbide Ball Nose Endmills.

HSB 4...M 4 Flute, 30 degree Helix Medium Solid Carbide Ball Nose Endmills.	HSR 2 (0.3-4.0) Solid Carbide Endmills,Long Neck Corner Radius, 2 Flutes, 30° Helix.	HSR 2 (6.0-12.0) Solid Carbide Endmills,Long Neck Corner Radius, 2 Flutes, 30° Helix.

HSR 4 (1.0-3.0) Solid Carbide Endmills,Long Neck Corner Radius, 4 Flutes, 30° Helix.	HSR 4 (6.0-12.0) Solid Carbide Endmills,Long Neck Corner Radius, 4 Flutes, 30° Helix.	HSR 6 Solid Carbide Endmills,Long Neck Corner Radius, 6 Flutes, 45° Helix.

HSR 6...M Solid Carbide Endmills, Medium Corner Radius, 6 Flutes, 45° Helix.	HFM 2*** SOLIDFEED new solid carbide endmill for high feed mill	HFM 4*** SOLIDFEED new solid carbide endmill for high feed mill

BES 2___T Solid Carbide Endmills, Spherical Ball nose, 2&4 Flutes, 30° Helix	BES 4___T Solid Carbide Endmills, Spherical Ball nose, 2&4 Flutes, 30° Helix	SBO 2___T Solid Carbide Endmills, Ball nose, 2 Flutes, 30° Helix

AMB 2___T Solid Carbide Endmills, Ball nose, 2 Flutes, 30° Helix	AMR 2___T-R__ Solid Carbide Endmills, Square End-Corner Radius, 2 Flutes, 30° Helix	AMR 4___T-R__ Solid Carbide Endmills, Square-End Corner Radius, 4 Flutes, 30° Helix

AMR 6___T-R__ Solid Carbide Endmills, Square-End Corner Radius, 6 Flutes, 45° Helix	SBE 4___ Solid Carbide Endmills, Ball nose, 4 Flutes, 30° Helix	SBE 4___T Solid Carbide Endmills, Ball nose, 4 Flutes, 30° Helix

EBE 2...L Solid Carbide Endmills,2 Flute Long Ball - Economical Type, 30 Helix.	EBE 2...M Solid Carbide Endmills,2 Flute Medium Ball - Economical Type,30 Helix.	EBE 2...S Solid Carbide Endmills,2 Flute Short Ball - Economical Type,30 Helix.

SBE 2___ Solid Carbide Endmills, Ball nose, 2 Flutes, 30° Helix	SBE 2___L Solid Carbide Endmils, Ball nose, 2 Flutes, 30° Helix	SBE 2___LT Solid Carbide Endmills, Ball nose, 2 Flutes, 30° Helix

SBE 2___S Solid Carbide Endmills, Ball nose, 2 Flutes, 30° Helix	SBE 2___T Solid Carbide Endmills, Ball nose, 2 Flutes, 30° Helix	AEB 2___S Solid Carbide Endmills, Ball nose, 2 Flutes, 50° Helix

AEB 3___M Solid Carbide Endmills, Ball nose, 3 Flutes, 40° Helix	REB____L Solid Carbide Roughing Endmills, Ball nose, 3~4 Flutes, 20°°Helix	SBT 3***U STARMILL PLUS solid ball endmill

SBT 4***U STARMILL PLUS solid ball endmill	TFMRX-R-20 CHASEMOLD Face mills using RXMX 20 insert for profiling and milling of round corners.	TFMRX-R-10/12/16 CHASEMOLD round inserts for profiling and milling of round corners

TERX-M-10/12/16 Modular head for RXMX 10/12/16 insert.	TERX-20 CHASEMOLD end mills using RXMX 20 inserts for profiling and milling of round corners.	TERX-10/12/16 CHASEMOLD End mills for RXMX 10/12/16 insert.

DEB 2___L Solid Carbide Endmills, Ball nose, 2 Flutes, 30° Helix	DEB 2___S Solid Carbide Endmills, Ball nose, 2 Flutes, 30° Helix	HES 4___LT-R Solid Carbide Endmills, Square End, 4 Flutes, 30°°Helix

HES 2___LT-R Solid Carbide Endmills, Square End, 4 Flutes, 30° Helix	HES 4___T-R__ Solid Carbide Endmills, Square-End Corner Radius, 4 Flutes, 30° Helix	HES 2___T-R__ Solid Carbide Endmills, Square End-Corner Radius, 2 Flutes, 30° Helix

TERD-05/07 CHASEMOLD end mills carrying round inserts for profiling and milling of round corners.	TERD-M-05/07 Endmills with coarse pitch for four insert shapes with T-FLEXTEC adaptation.	TERP-W-12CH Dimple ceramic endmill for aerospace industry & cast iron

TEXD-08 Fast feed end mills with XOMT 08 inserts.	TEXD-13 CHASE2FEED end mills with XDMX 13 inserts.	TEXD-M-08/13 Modular head type end mill of CHASE2FEED line.

TFMXD-R-O8 CHASE2FEED Cutter face mills using XDMX 08 inserts.	TFMXD-R-13 CHASE2FEED face mills milling cutters with XOMT 13 inserts.


TCF-11 30° chamfering Endmills.	TNF FINEBALL steel shank holder	TNF-CT-L FINEBALL carbide shank type holder

TNF-M FINEBALL modular head type holder


TE45SE-12 45° CHASEQUAD end mill using SEKT 12 insert.	CEM ____ Solid Carbide Endmills, 2 Flutes, 30° Helix	CEM 2___ Solid Carbide Endmills, 2 Flutes, 30° Helix

14D-F45XN-R-09 CHASE2HEPTA screw type facemill cutter	14D-F45XN-06 CHASE2HEPTA screw type facemill cutter.	14D-F45XNW-R-09 CHASE2HEPTA wedge type facemill cutter

TFM45SE-R-12/12F 45° face mills using SEK/MT.. inserts.	TFM45AN-R-16 CHASE2MILL cutter for 45° entering angle	TFM45SNS-R-16 45°CHASE2QUAD cutter with inclined screw clamp type for heavy rough milling

TFM45SN-R-13 CHASE2QUAD face mill	TFM45SNS-R-16B-CA 45°CHASE2QUAD cutter with cartrige type for heavy rough milling	TFM45SNW-R-16 45°CHASE2QUAD cutter with wedge clamp type for heavy roughing

TFM45HN-R-10 TFM45HN: HEXA2MILL fine pitch wedge clamp type 45°. TQ45HN: HEXA2MILL fine pitch quick change type 45°.	TFM45HNS-R-10 HEXA2MILL Double sided screw clamp type 45deg	TCF-11 30° chamfering Endmills.

LM60SC-R-21 LIONMILL for heavy milling cutter with 21 size insert	LM60SC-R-27 LIONMILL for heavy milling cutter with 27 size insert	LM45SD-R-12 LIONMILL 45° face mill cutter.

LM45SD-R-15 LIONMILL 45° face mill cutter.	LM45SE-R-12 LIONMILL 45° face mill cutter.	LM45SE-R-15 LIONMILL 45° face mill cutter.

TFM15HNS-R-10 HEXA2MILL High feed screw clamp type 15deg	TFM55AHNS-R-05 Angled screw on type size HEXA2MILL cutter.	TFM75SN-R-13 CHASE2QUAD face mill

TFM75AP-R-17 75° face mills using APKT 17 CHASEMILL inserts.	TFM43ZOFW-R-07 43° face mills using octagonal and round inserts.	TFM43OFS-R-05 43° face mills using octagonal and round inserts.

TFM88SN-R-13 CHASE2QUAD 88° Face Mill cutter.	LM75SP-R-12 LIONMILL 75° face mill cutter.	LM75SP-R-15 LIONMILL 75° face mill cutter.

14D-F45XNW-09-QC CHASE2QUAD new quick change type cutter.	TFM45SN-13-QC CHASE2QUAD new quick change type cutter.	TQ45SNW-R-16 45° new CHASE2QUAD cutter with quick change type for heavy rough milling

TQ45HN-R-10 45 HEXA2MILL cutter with quick change type for heavy rough milling.	CEM-C120 Solid Carbide Endmills, 2 Flutes, 120° Helix	CEM-C60 Solid Carbide Endmills, 2 Flutes, Point angle 60°

ECEM 2*** Eco Chamfer EndMill(ECEM), 2 flutes	ECEM 4*** Eco Chamfer EndMill(ECEM), 4 flutes


Телефон: (383) 263-32-98 +7-999-451-42-89	E-mail: Этот адрес электронной почты защищен от спам-ботов. У вас должен быть включен JavaScript для просмотра. Этот адрес электронной почты защищен от спам-ботов. У вас должен быть включен JavaScript для просмотра.

Адрес: 630091, г. Новосибирск ул. Красный проспект, 72	Часы работы: ПН - ПТ: 9:00 - 18:00 СБ - ВС: выходные

"T" Slotting

Profiling

Countersinking

Counter Boring

Slotting

Slanted Shoulder. & Chamfer.