Slotting
 |
 |
 |
||
| TE90XEV-M-16 CHASEALU modular type holder. |
TE90XEV-16/22 CHASEALU end mill holder. |
TE90XEV-HSK63A-16 |
||
|
|
|
|
||
|
TFM90XEV-R-16/22 |
6N TF90-R-04 |
6N TE90-M-04 |
||
|
|
|
|
||
| 6N TE90-04 MILL2RUSH end mill type holder. 90 machining with a 6-corner insert for cost effective machining. |
2P TE90-05 |
2P TE90-M-05 |
||
|
|
|
|
||
| 2P TF90-R-05 CHASEMILL POWER Facemill cutter for 2PKT 05. |
4N TE90-M-06 CHASE2MILL Modular type for 4NKT 06 inserts. |
4N TF90-R-06 CHASE2MILL Facemill cutter for 4NKT 06 inserts. |
||
 |
 |
 |
||
| 4N TE90-06 CHASE2MILL Endmill for 4NKT 06 inserts. |
2S-TFM90AP-R-19 CHASEMILL face mill for APKT 19. |
2S-TE90AP-19 CHASEMILL end mills for APKT 19. |
||
|
|
|
|
||
| 6N TE90-06/09 MILL2RUSH endmill type holder |
6N TE90-M-06/09 MILL2RUSH modular type holder |
3P TE90-06 MILLRUSH end mills with 3PKT 06 |
||
|
|
|
|
||
| 3P TE90-M-06 MILLRUSH modular type holder. |
3P TE90-10/15/19 MILLRUSH end mills for 3PKT 10/15/19 |
3P TE90-M-10/15/19 MILLRUSH modular type for 3PKT 10/15/19 |
||
|
|
|
|
||
| TE90AN-11 CHASE2MILL end mill type holder |
TE90AN-M-11 CHASE2MILL modular type holder |
TE90AN-16 End mills with double sided helical cutting edges. |
||
|
|
|
|
||
| TE90AN-M-16 CHASE2MILL modular holder for 90° entering angle |
TE90AX-M-06 Modular heads for CHASEMILL end mills with AX 06; 12-32mm dia |
TE90AX-06 Endmills for AXMT 06..inserts. |
||
|
|
|
|
||
| 2S-TE90AP-M-09 CHASEMILL modular type for new APKT 09 insert |
2S-TE90AP-09 CHASEMILL end mills for new APKT 09 |
TE90SD-05-C CHASEQUAD end mill for small part machining using SDMT 05 insert with 4 cutting edges. |
||
|
|
|
|
||
| TE90AP-M-12 Modular head for CHASEMILL end mills using APKT 12 inserts |
TE90AP-12 CHASEMILL end mills for APKT 12.. inserts; 16-40mm dia. |
TE90AP-17 CHASEMILL end mills for APKT 17 insert |
||
|
|
|
|
||
| TE90AP-M-17 Modular head type end mills for APKT 17 inserts. |
TE90SD-M-05 CHASEQUAD- modular head type using SDMT 05 inserts |
TESB...-M-13 CHASEFEED Modular for SBMT 13 inserts. |
||
|
|
|
|
||
| TESB...-13-L CHASEFEED Endmill for SBMT 13. |
TFMSB...-R-13 CHASEFEED Face mill for SBMT 13. |
TFMBL-R-13 CHASE2FEED face mill type cutters for BLMP 13 inserts. |
||
 |
 |
 |
||
| TEBL-13-L CHASE2FEED End mill Type for BLMP 13. |
TEBL-M-13 CHASE2FEED Modular Type for BLMP 13. |
TSF-06 End mills for XOMT 06 inserts ; 12-20mm dia. |
||
 |
 |
 |
||
| TSF-09/11/14 End mills for SPMG,SPMT inserts ; 22-50mm dia. |
SCRM90TN-M-18 MILL2RUSH Modular Type holder. |
SCRM90TN-W-18 MILL2RUSH endmill type holder. |
||
 |
 |
 |
||
| TNFR-M FINEBALL carner radius type modular head holder |
TNFR FINEBALL corner radius type with steel shank holder |
TNFR-CT-L FINEBALL carner radius with tungsten carbide shank holder |
||
 |
 |
 |
||
| TE90XE-M-16 CHASEALU Endmill with T-FLEXTEC Adaptation with XECT 16 insert. |
TE90XE-16 CHASEALU end mill holder |
CFM 4...M APEXMILL4 flutes 38 deg helix angle |
||
 |
 |
 |
||
| FSM 4_M MULTIMILL 4 flute high helix design for roughing and finishing. |
HFM 4*** SOLIDFEED new solid carbide endmill for high feed mill |
HFM 2*** SOLIDFEED new solid carbide endmill for high feed mill |
||
 |
 |
 |
||
| HMF 2___ Solid Carbide Endmills, Square End, 2 Flutes, 30° Helix |
REH ____L Solid Carbide Roughing Endmills, 4~6 Flutes, 45° Helix |
REH _ ____M Solid Carbide Roughing Endmills, 4~6 Flutes, 45° Helix |
||
 |
 |
 |
||
| REH _ ____S Solid Carbide Roughing Endmills, 4~6 Flutes, 45° Helix |
REMA 3___(C) Solid Carbide Roughing Endmills, 3 Flutes, 45° Helix |
REA 3___L Solid Carbide Roughing Endmills, 3 Flutes, 30° Helix |
||
 |
 |
 |
||
| REL _ ____L Solid Carbide Roughing Endmills, 3~5 Flutes, 20° Helix |
HES 2___LT Solid Carbide Endmills, Square End, 2 Flutes, 30° Helix |
HES 2___LT-R Solid Carbide Endmills, Square End, 4 Flutes, 30° Helix |
||
 |
 |
 |
||
| HES 2___X LT Solid Carbide Endmills, Square End, 2 Flutes, 30° Helix |
HES 2___T-R__ Solid Carbide Endmills, Square End-Corner Radius, 2 Flutes, 30° Helix |
HES 4___LT Solid Carbide Endmills, Square End, 4 Flutes, 30° Helix |
||
 |
 |
 |
||
| HES 4___X LT Solid Carbide Endmills, Square End, 4 Flutes, 30° Helix |
HES 4___T-R__ Solid Carbide Endmills, Square-End Corner Radius, 4 Flutes, 30° Helix |
HES 6___T Solid Carbide Endmills, Square End, 6 Flutes, 45° Helix |
||
 |
 |
 |
||
| SED 3___T Solid Carbide Endmills, Square End, 3 Flutes, 50° Helix |
TSE 2...M-UNCOATED APEXMILL-TSE ENDMILL-UNCOATED |
TSE 2...M APEXMILL-TSE ENDMILL |
||
 |
 |
 |
||
| AES 2***XL Solid Carbide Endmills, Square End, 2 Flutes, 45° Helix |
AES 2*** Solid Carbide Endmills, Square End, 2 Flutes, 45° Helix |
AES 2***-R ALUMILL 2 flutes with Corner R |
||
 |
 |
 |
||
| AMR 2___T-R__ Solid Carbide Endmills, Square End-Corner Radius, 2 Flutes, 30° Helix |
AMF 2___T Solid Carbide Endmills, Square End, 2 Flutes, 30° Helix |
HSF 2 (5.0-12.0) Solid Carbide Endmills, Long Neck Flat, 2 Flutes, 30 Helix. |
||
 |
 |
 |
||
| HSF 2 (0.3-4.0) Solid Carbide Endmills, Long Neck Flat, 2 Flutes, 30 Helix. |
HSF 4 (6.0-12.0) Solid Carbide Endmills, Long Neck Flat, 4 Flutes, 30 Helix. |
HSF 4 (1.0-5.0) Solid Carbide Endmills, Long Neck Flat, 4 Flutes, 30 Helix. |
||
 |
 |
 |
||
| HSF 6...M Solid Carbide Endmills, Medium Flat, 6 Flutes, 45 Helix. |
HSF 6...XLT Solid Carbide Endmills, Extra Long Flat, 6 Flutes, 45 Helix. |
HSR 2 (0.3-4.0) Solid Carbide Endmills,Long Neck Corner Radius, 2 Flutes, 30° Helix. |
||
 |
 |
 |
||
| HSR 2 (6.0-12.0) Solid Carbide Endmills,Long Neck Corner Radius, 2 Flutes, 30° Helix. |
HSR 4 (1.0-3.0) Solid Carbide Endmills,Long Neck Corner Radius, 4 Flutes, 30° Helix. |
HSR 4 (6.0-12.0) Solid Carbide Endmills,Long Neck Corner Radius, 4 Flutes, 30° Helix. |
||
 |
 |
 |
||
| HSR 6 Solid Carbide Endmills,Long Neck Corner Radius, 6 Flutes, 45° Helix. |
HSR 6...M Solid Carbide Endmills, Medium Corner Radius, 6 Flutes, 45° Helix. |
DMR 2___ Solid Carbide Endmills, Corner Radius, 2 Flutes, 30° Helix |
||
 |
 |
 |
||
| TSE 4...M APEXMILL-TSE ENDMILL |
TSE 4...M-UNCOATED APEXMILL-TSE ENDMILL-UNCOATED |
EFE 2...S APEXMILL 2 Flute Short Flat - Economical Type, 30 Helix. |
||
 |
 |
 |
||
| EFE 2...L Solid Carbide Endmills,2 Flute Long Flat - Economical Type, 30 Helix. |
EFE 2...M APEXMILL 2 Flute Medium Flat - Economical Type, 30 Helix. |
EFE 3...S Solid Carbide Endmills,3 Flute Short Flat - Economical Type,38 Helix. |
||
 |
 |
 |
||
| EFE 3...M Solid Carbide Endmills,3 Flute Medium Flat - Economical Type, 38 Helix. |
EFE 4...L APEXMILL 4 Flute Long Flat - Economical Type, 30 Helix. |
EFE 4...M APEXMILL 4 Flute Medium Flat - Economical Type, 30 Helix. |
||
 |
 |
 |
||
| EFE 4...S APEXMILL 4 Flute Short Flat - Economical Type, 30 Helix. |
SED 4...U STARMILL PLUS solid carbide endmills, 4 flutes, 45 helix |
RFE 2***SS 2 Flute, 30° Helix, Solid Carbide Endmill with Slim Shank type |
||
 |
 |
 |
||
| RIF 2___ Solid Carbide Endmills, Square End, 2 Flutes, 30° Helix |
3P TEF-06 Extended flute end mills for 3PKT inserts. |
3P TEF-10 Extended flute end mills for 3PKT inserts. |
||
 |
 |
 |
||
| 3P TES-10 Extended flute shell mills for 3PKT inserts. |
3P TEF-15 Extended flute end mills for 3PKT inserts. |
3P TES-15 Extended flute shell mills for 3PKT inserts. |
||
 |
 |
 |
||
| 3P TEF-19 Extended flute end mills for 3PKT inserts. |
3P TES-19 Extended shell mills for 3PKT inserts. |
2S-TEF-AP09 CHASEMILL extended flute end mills with APKT 09 |
||
 |
 |
 |
||
| TEF-W-AP12 Extended flute end mills using APKT 12 inserts; Full effective |
TES-AP12 Shell mill extended flute using ADKT/R-15.. inserts |
TEF-AN11 CHASE2MILL end mill type holder with long edge |
||
 |
 |
 |
||
| TES-AN11 CHASE2MILL shouldering type cutter with long edge |
TEF-AN16 CHASE2MILL extended flute end mill holder |
TES-AN16 CHASE2MILL shouldering cutter with long edge |
||
 |
 |
 |
||
| TEF-AX06 Extended flute end mills for AXMT 06/12 inserts. |
TEF-SD05 Extended flute end mills for SDMT 0502 inserts ; 20-25mm dia |
TES-AP17 Extended flute shell mill using APKT 17 inserts |
||
 |
 |
 |
||
| TEF-W-AP17 Extended flute end mills using APKT 17 inserts; Full effective |
TES-TN18 MILL2RUSH extended shell mills using TNMX chip splitter inserts. |
TEF-TN18 MILL2RUSH extended flute mills using TNMX chip splitter inserts. |
||
 |
 |
 |
||
| TEF-09/11 Extended flute end mills using SPMT 09/11, SPMG 09/11 inserts ; 32-50mm dia. |
TES-11/14 Extended flute shell mill using SPMT 11/14, SPMG 11/14 inserts - full effective |
3P TF90-R-06 MILLRUSH face mill with 3PKT 06 |
||
 |
 |
 |
||
| 3P TF90-R-15/19(INCH BORE) MILLRUSH face mill for 3PKT 15/19 with inch bore |
3P TF90-R-10/15/19 MILLRUSH face mill cutter (Coarse Pitch & Large Dia) |
SCRM90TN-R-22 Triangle shape double side screw clapm type 90° cutter. |
||
 |
 |
 |
||
| SCRM90TN-R-18 MILL2RUSH face mills using TNMX 18 inserts. |
TFM90SD-R-05 CHASEQUAD- face cutters for SDMT 05.. inserts ; 32-40mm dia. |
TFM90AX-R-06 CHASEMILL face cutters for AXMT 0602 inserts ; 32-40mm dia |
||
 |
 |
 |
||
| TFM90XE-R-16 CHASEALU Face mill cutter with XECT 16.. |
TFM90AN-R-11 CHASE2MILL face mill with AN..11 inserts |
TFM90AN-R-16 CHASE2MILL face mills with AN.. 16 inserts-double sided helical insert with 4 cutting edges |
||
 |
 |
 |
||
| 6N TF90-R-06/09(INCH BORE) MILL2RUSH facemill cutter(Inch Bore) |
6N TF90-R-06/09 MILL2RUSH face mill cutter |
LM90SE-R-21 90 LION HEAVY cutters for SEKX 21 size insert. |
||
 |
 |
 |
||
| TFM90AP-R-17/17-B 90° face mills using CHASEMILL APKT 17.. inserts. |
TFM90AP-R-12 CHASEMILL face cutters using APKT 1204.. ; Dia 40-80 mm |
2S-TFM90AP-R-09 CHASEMILL face cutter for new APKT 09 |
||
 |
 |
 |
||
| TFM90SE-R-13 90°°face mills using SEMT insert. |
TSM-M-SL (MODULAR TYPE) Grooving and slotting cutters. |
TSM-W-SL (ENDMILL TYPE) Grooving and slotting cutters. |
||
 |
 |
 |
||
| TSM...R-TS16(FLANGE TYPE) Grooving shell mills with 3 cutting edges inserts. |
TSM...-W...-TS16(ENDMILL TYPE) Grooving shell mills with 3 cutting edges inserts. |
TSM FF-ZNHT 018-053 TOPSLOT fixed pocket flange type cutter |
||
 |
 |
 |
||
| TSM FD-ZNHT 018-053 TOPSLOT fixed pocket disk type cutter |
TSM FF-ZNHU 080/110 TOPSLOT fixed pocket flange type cutter (ZNHU) |
TSM FD-ZNHU 080/110 TOPSLOT fixed pocket disk type cutter (ZNHU) |
||
 |
 |
 |
||
| TSM ***FF-ZN08/11/14(ADJUST) TOPSLOT adjustable flange type cutter |
TSM ***FD-ZN08/11/14(ADJUST) TOPSLOT adjustable disk type cutter |
TSC-SLOTTING Slotting Cutters |
| Телефон: (383) 263-32-98 +7-999-451-42-89 |
E-mail: Этот адрес электронной почты защищен от спам-ботов. У вас должен быть включен JavaScript для просмотра. Этот адрес электронной почты защищен от спам-ботов. У вас должен быть включен JavaScript для просмотра. |
| Адрес: 630091, г. Новосибирск ул. Красный проспект, 72 |
Часы работы: ПН - ПТ: 9:00 - 18:00 СБ - ВС: выходные |
